PVS-14 QD Pivot Mount LT755-14

 
$189.00
SKU: LT755-14
The perfect weapon mounting solution for those who own a PVS-14.
By popular demand, we designed this lightweight and robust pivoting mount for the PVS-14. The captive mounting screw is easy to mount in the dark, or when wearing gloves. When installed and positioned behind the primary optic, the PVS-14's on/off switch and gain control are located conveniently at the top for easy access.

Designed to mount behind LT-mounted Aimpoints (Comp M2, M3 and M4), our Pivot Mount places a PVS-14 in perfect, 1.725" centerline height-alignment, providing proper cheek-weld. With durability and simplicity in-mind, this spring-tensioned pivot mount has no buttons and no switches. You simply grasp the PVS-14 one-handed, pull back, move it in-position, release, and you're good-to-go. Once it's locked into position, it does not move `till you want it to. Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and Type-III hard-coat anodized.

Comes complete with QD adjustment wrench and Instructions
3129
5
7 out of 7 people found this helpful.
Reviewed by Anonymous 3 years ago
Recently purchased one of these mounts for my ATN 6015-4 NV scope, mounted behind a T-1. Yes mount works same as if mounted on the PVS-14. As normal for Larue this is an excellent mount, tucks up tight to the T-1 and clears my Troy BUIS (whereas the mount I replaced did not). Ya can't go wrong purchasing anything these guys sell.
Login to rate this review.
1042
5
7 out of 7 people found this helpful.
Reviewed by Anonymous 3 years ago
Great mount, lock up is perfect! mounted behind a Aimpoint Comp M3 with PVS 14, would like to see Larue make this mount in a left swing version.
Login to rate this review.
6802
5
2 out of 2 people found this helpful.
Reviewed by Anonymous 1 year ago
Excellent Mount as all things LaRue- I purchased the LT-114 without thinking for one setup. Wish I had bought this one first. Very well designed and constructed. Best on market...from anywhere. We use it for Hog Hunting regularly. The only way to go. E-Z to gear up and hunt late evening daylight and just flip it over for NV and set the T-1 Micro-Dot for IR when it gets dark. Minimal movement, minimal noise.
Login to rate this review.
2900
0
9 out of 17 people found this helpful.
Reviewed by Anonymous 3 years ago
One thing that is vaulable to any hunter or tactical shooter is flexibilities to get the job done. The Black Dagger Team does a lot of shooting and we have a niche market on night hunting in our area. These pivot mounts are an outstanding product that is well designed with flexibility in mind. We have our EOTech optics which are nightvision capabable and have mounted our pivot mount as a permanent fixture on our M4 rifles. Our first night hunt went smoothly when we were able to slide out PVS-14 to the side when 6-7 hogs came in our AOR. It was dusk and we made the decision to use the availabe light and use the EOTech. We have great addition to our toolkit! Dave Black Dagger MHC
Login to rate this review.
5634
5
0 out of 1 people found this helpful.
Reviewed by Anonymous 1 year ago
I have this mount and it is solid as a rock. I do have one caution for users of the Aimpoint CompM4s version (low mounted battery tube) of the Aimpoint CompM4 line. I have a PVS-14 night vision device with the LaRue LT755-14 QD Mount. That mount, when mounted behind a CompM4s optic will result in needing to mount the CompM4s farther forward on the rail in order for the LaRue LT755-14 QD Mount to clear the lower battery tube on the M4s. I had to return my M4s for a M4 version to get best mounting position with the PVS-14. This is NOT a criticism of the LaRue PVS-14 mount, just a "heads up" to buyers.
Login to rate this review.
11655
4
0 out of 0 people found this helpful.
Reviewed by highdesertnm 10 weeks ago
NOTE: Read below if you plan to use with an Aimpoint Comp M4s! Excellent quality and construction, as always from Larue products. My only complaint is that the arm needs to be modified a little to work with an Aimpoint Comp M4S (low battery compartment). As currently designed, the PVS-14 mount must be mounted a little too far behind the Comp M4S so the arm can clear the dial on the battery compartment. The mount is still usable with he M4s, it just isn't in the optimal position. Of course, the service and the Dillo Dust were excellent, as usual!
Login to rate this review.
11627
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 11 weeks ago
Product is exactly as advertised and works flawlessly. Also love the Dillo Dust seasoning.... Thanks
Login to rate this review.
11605
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 11 weeks ago
Great product as usual.
Login to rate this review.
9180
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 44 weeks ago
Thank you for building a mount that works like promised. Another great LaRue Product..
Login to rate this review.
7530
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Rock solid mount! Use the mount on my PVS-14, behind an Aimpoint M4 (battery in the upper position). Works great. Highly recommended mount.
Login to rate this review.

Post new Review

Please leave a star rating for your review.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Web page addresses and e-mail addresses turn into links automatically.

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.