The clarity, resolution, and image quality of the low-profile NightForce 2.5-10x32 NXS Tactical Riflescope With Zero-Stop and MOA Adjustment rival or exceed those of competitors' scopes with much larger objective lenses.
It is a practical all-around choice for traditional hunting and general shooting.

The NXS Zero Stop allows a set zero "barrier" at any preferred distance. Returning to a known setting is useful when adjusting audibly in low-light conditions and circumstance where you need eyes on-target. Setting the Zero Stop is easy as removing the turret cap and loosening three set-screws. Adjust the scope to preferred distance (with a shot confirmation), and reverse order to reassemble.

Comes complete with LaRue Tactical LT104-30 QD mount, installation tools and instructions.

Note to MBUS Users: The LT-104 will not provide enough clearance for the rear MagPul MBUS. If the rifle will have the rear MBUS installed, the correct scope mount to purchase is the LT-135.

About the Mil-Dot Reticle This MIL-DOT is designed for field tactical and long range field applications. Unlike many MIL-DOT reticles, this design features a hollow dot that will not obscure the target. This reticle is designed for fast range estimation and target acquisition in tactical situations.

TECHNICAL SPECIFICATIONS:
Developed by the military, the mil-dot reticle allows the sniper to estimate the range to his target. The mil-dot is now the standard reticle found in law enforcement rifle scopes. The term itself, mil-dot, refers to a trigonometric function called milliradian and a dot, which appears as a series of round shaped reference points located on the reticle. Advanced developments at NightForce have resulted in the creation of a new style of mil-dot reticle. Rather than the solid dots that obscure most of the target, the NightForce mil-dot reticle consists of see-through round dots which are placed on the vertical and horizontal cross lines that serve as reference points. In addition, all four posts are also see-through. Because both the dots and posts are clear, the target is no longer obscured. As a result, these features enable the sniper to more accurately estimate the range to his target. The dots are spaced precisely 1 mil apart which represents 3.6 inches at 100 yards at specified power. The mil-dot design is etched on precision multi-coated compound glass. This eliminates breakage and misalignment of the reticle. Because of NightForce's illumination technology, the glass etched reticle glows red and can be illuminated at different intensities. This flexibility ensures excellent reticle contrast in low light when illuminated or a well-defined black reticle when not illuminated.