The Industry Standard.
The LT104 is the best mount made for attaching high-power riflescopes onto
flattop-style AR15's, period.
The LT104 places the centerline of the optic 1.5" above the top of the rail for
optimum cheek weld with a variety of AR-platform rifles. The cantilever
positions the scope out front over the handguard, eliminating the need to span
from the receiver to the handguard. The cantilever also allows the shooter to
obtain proper eye relief.
The popularity of the SPR series of mounts is partially due to the innovative
backbone that connects the split vertical rings. This design provides a more
robust platform for the optics, increases repeatability, and eliminates the need
for time-consuming lapping. The rings are precision-machined with the tightest
tolerances, and feature threaded steel inserts, built to withstand a lifetime of
abuse.
Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and
anodized. The locking LaRue Speed Levers provide outstanding return to zero; the
optic can be removed, and replaced, without loss of zero. Guaranteed.
Assembly and adjustment only takes a few minutes, then off to the range.
About VFZ Mounts:
VFZ is a new theory in the concept of clamping accessories to MIL-STD-1913
rails. Instead of using a horizontal cross-bolt, the VFZ uses a vertical bolt
that draws up a clamping foot against the lower angle of the rail, seating the
mount similarly to a fully-closed LaRue lever.
Once installed on the firearm, index marks allow the user to remove the mount,
then reattach to the same tension, providing unprecedented return to zero for a
non-QD-levered mount. The unique vertical alignment of the clamp allows
components that are structurally stronger than traditional cross-bolt designs.
Ring Sizes Available:
Available with: 35mm, 34mm, 30mm or 1" rings (see pull-down menu to the right).
Note on BUIS systems:
Some BUIS will not fit under your scope in this mount. If you have ANY questions
on your application, please call us. We are well versed in fitment. Do not
automatically order the taller mount before consulting with us. Thanks!
Available with LaRue QD Speed Levers or VFZ mounts (see pull-down to the
right)
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913
rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt
that draws up a clamping foot against the lower angle of the rail, seating the
mount similarly to a fully-closed LaRue lever. Once installed on the firearm,
index marks allow the user to remove the mount, then reattach to the same
tension, providing unprecedented return to zero for a non-QD-levered mount. The
unique vertical alignment of the clamp allows components that are structurally
stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the
rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term,
semi-permanent mounting alternative to our well-known Speed Levers. While both
mounts will allow the user to remove the mount from the weapon, reinstall it in
the same position, and return to zero, the VFZ™ mount is intended for users that
will not need to constantly remove and install their mounts (especially in the
field).
Great mount for my flat top AR. Solid, well built, and easy to use (mount and remount). Paired with a Leupold VR-X Patrol 1-4. Couldn't be any happier. Removed the optic several times to work exclusively with the iron sights and each time I remounted it the zero was been right on. Can't foresee a scenario where I'd choose to purchase a mount in the future from anyone but LaRue Tactical.
Just mounted my second LT104 on another rifle. What else can you say...these are awesome mounts! Outstanding quality and service from LaRue makes the difference. I'm hooked!!
there is a reason that i keep coming back to larue for all of my optic and mounting needs...simply the best value and quality you will find, hands-down. matched this with a leupold 1-4x24 on my SCAR 17. absolute best mount for any type scope. customer service is top-notch and they always ship fast. this is my 3rd purchase from larue. i have one of thier aimpoint micro t-1 with larue mount combo's on my M6A2 (which together cost the same or less than what other sellers were selling just the optic for) and one of thier ACOG RCO speed lever mounts. i will continue to come back for all of my future shooting accessory/optic needs.
I recently installed the 104 mount on my new match/competition AR platform rifle. It's very nice.
I would like to clarify that the 104 mount puts the scope centerline exactly 1.5" above the rail as advertised. Be aware the barrel centerline to optic centerline is 2.8". The 2.8" height is great for 223 bullet drop ballistics versus a lower mount. However, I would recommend a cant indicator at this height.
This is an awesome setup !! I combined this with an AP Micro H1/LT-660 QD mount and have the ultimate in QD optic flexibility. Go on now and getcha one and Get 'er Dun !!
Pick up a scope case of your choice to protect the optic/mount during storage/travel.
Another outstanding product from LaRue !!
This the the QD mount by which all others are judged, and it's easy to forget why. I put together a video review you can watch at http://www.youtube.com/watch?v=rpAJCeNn9ow which shows the features of this mount as well as tests its ability to return to zero. This is a great mount at a great price.
Christmas came early. Mount is excellent, and there are no complaints. I had no issues mounting my HI-LUX CMR. When I ordered, I was worried about the clearance due to the flip-up rear sight I have mounted. No clearance issues at all. Thank you LaRue for all the extra goodies...meat rub seasoning, LaRue bottle opener, bumper stickers, pocket Constitution, and DVD of the sniper competition. I will definitively always look at your business first before buying elsewhere.
I'm running this mount on a SCAR-17 with a Leupold VX-R Patrol. I love the fact that I can remove the scope to use the iron sights if needed. It's solid as can be, looks great, and is lighter than I expected. The wife's nagging for a week about the cost is a small price to pay for the quality. Thanks LT, I will be a returning customer!
Just mounted a Trijicon TR22-2 with the LT104 and it was a flawless fit on my RRA Coyote Rifle. Very pleased with the excellent fit and finish. Well worth the money, and the extra swag made it an even sweeter deal.
Not my first LaRue Tactical mount, and certainly not my last.
The mount itself is very light weight, solidly built and super simple to put on and take off the rifle, and it locks down tight. Like other peoples reviews have stated, it seemed a bit pricey at first, but the quality is excellent and it is nice to be able to buy something this well made and Made in America. I also wanted to say your customer service is exceptional. My e-mail was answered right away and I think the mount was shipped within 1 hour of placing the order and before my credit card had even been charged. Thank you for the extra swag that was sent along with the package. Nice touch. I enjoyed the DVD. Thanks for a great product.
This is a great scope mount. Super fast shipping and excellent quality. Made in America, what else could you ask for? This was my first purchase from larue, and I am very impressed. I will be purchasing more from these guys in the future!! Love the bottle opener and the rub. Thanks again
I absolutely love this new mount! I will definately be ordering more LaRue products later in life. You have a customer for life! This mount is super solid and just locks into position like it should. I ordered it for my DTI 5.56 and mounted a Nikon 3x-12x M-223 with BDC-600 and 1inch rings. I absolutely love the Dillo beverage entry tool its my favorite. Havent tried the dillo dust yet, but will definately get into it soon. Love it! thank you guys again!
using #104 mount lupold 30mm tube 4x12x50 balFireDot on a 300rum sendero, so far no problem with recoil affecting zero, No kick with pws muzzle brake, dont expect any problems IF I ever fire this cannon without the brake!!
I have #104 on dpms ar10 308 in a 1-inch tube burris 4x12x40 fulfield, changed barrels, the scope still shoots in bullseye. Scope has been off &on many times!
I'll use this mount on all my shooters!
There are other mounts that do the same return to zero, But they are not A4 rail type with levers.
Probably the best scope mount on market for light weight, stout, & returns to zero.
pricey but good.
MM
This is the first, last and the cream filling in optic mounting. Mark, this just like all your products is outstanding. Returns to zero, and is a stout but light little bastard. WOW just like advertised. Larue Tactical is a class act.
ps. thanks for the Dilo-Dust its great and the beverage entry tool is used often
From Larue's add: "The Industry Standard. The LT104 is the best mount made..."
They should have stopped right there because that is all you need to know. This mount is much sleeker and about 2 ounces less then it's competition. I was skeptical at first due to the price and the return to zero claims. After buying 1 for my first AR build I must say it truely does return extremely close to zero and it is worth every penny. As of today I have two build's with two LT-104's. Every AR I build will have a LT optic mount atop it. Thanks Mark for the great products. Your company and staff are the best in the business.
From there add: "The Industry Standard. The LT104 is the best mount made..."
They could have stopped right there because that is all you need to know. I have ordered two of these and will continue to order them for every single AR I build. I was skeptical at first about the price and return to zero but they are dead on and worth every penny. These mount weigh about 2 ounces less than their competitors, look much sleeker, and are easy to install/sight in. My two has functioned absolutely flawless. LT is one of the best companies in the industry with knowledgeable, friendly customer service. I can not say good enough things about them.
Awesome mount - I bought this so I could quickly and easily switch between my acog and rifle scope. It mounts easily and returns to zero with no problems.
Awesome mount - I bought this so I could quickly and easily switch between my acog and rifle scope. It mounts easily and returns to zero with no problems.
LaRue Tactical has the best customer service and fast shipping. This mount is perfect and is exactly what I wanted. I will definitely order from them for all my other mounts. Keep up the great work and thank you. Aaron
This is the best mount for the money. Very solid, awesome mount for my Vortex PST 1-4x24.
Great quality Made in America!!! Will buy more for my upcoming AR builds.
Extremely solid mount. Used it for a SWFA SS 1-4x24mm on my LaRue PredatAR 7.62. Locking levers have a very stout feel.
Note: I ordered a RISR for use with this mount, but I don't need it. The RISR puts my eye too high behind the ocular.
Everything I have ever purchased from LaRue has been exceptional and this is no different. I bought of these mounts for my AR-15 DMR. I absolutely love it and will soon be buying another. The mount is extremely solid and simple. I get a return to zero every time...period.
There is a reason I own 3 of these. They return your scope to zero every time, locking rear lever makes sure you will always have your optic attached no matter what abuse you can hand it. LaRue quality is yet to be matched and you won't be disappointed.
Awesome mount - goes without saying - it's the cat's meow on my LMT MWS. Also impressive is the shipping speed. It seems like I got it before I ordered it.
The ultimate mount for adding a scope to your AR Platform. I have had this on my AR15 for almost two years now and have taken it on and off hundreds of times with no loss of zero. I gotta admit, at first I was put off by the price but it's worth every penny and more!! If you have the need to periodically remove your scope this is the mount you want! I'll be purchasing another soon for a custom .300 blackout upper, and I intend to buy the SPR-S LT158 for my upcoming AR10 platform.
The Industry Standard.
The LT104 is the best mount made for attaching high-power riflescopes onto flattop-style AR15's, period.
The LT104 places the centerline of the optic 1.5" above the top of the rail for optimum cheek weld with a variety of AR-platform rifles. The cantilever positions the scope out front over the handguard, eliminating the need to span from the receiver to the handguard. The cantilever also allows the shooter to obtain proper eye relief.
The popularity of the SPR series of mounts is partially due to the innovative backbone that connects the split vertical rings. This design provides a more robust platform for the optics, increases repeatability, and eliminates the need for time-consuming lapping. The rings are precision-machined with the tightest tolerances, and feature threaded steel inserts, built to withstand a lifetime of abuse.
Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and anodized. The locking LaRue Speed Levers provide outstanding return to zero; the optic can be removed, and replaced, without loss of zero. Guaranteed.
Assembly and adjustment only takes a few minutes, then off to the range.
About VFZ Mounts:
VFZ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever.
Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Ring Sizes Available:
Available with: 35mm, 34mm, 30mm or 1" rings (see pull-down menu to the right).
Note on BUIS systems:
Some BUIS will not fit under your scope in this mount. If you have ANY questions on your application, please call us. We are well versed in fitment. Do not automatically order the taller mount before consulting with us. Thanks!
Available with LaRue QD Speed Levers or VFZ mounts (see pull-down to the right)
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).
Post new Review