The LT745 places the centerline of the optic 1.5" above the top of the rail for
optimum cheek weld with a variety of flat top rifles. The cantilever positions
the scope out front over any handguard or barrel nut, eliminating the need to
span from the receiver to the handguard. The cantilever also allows the shooter
to obtain proper eye relief.
The popularity of the SPR series of mounts is partially due to the innovative
backbone that connects the split vertical rings. This design provides a more
robust platform for the optics, increases repeatability, and eliminates the need
for time-consuming lapping. The rings are precision-machined with the tightest
tolerances, and feature threaded steel inserts, built to withstand a lifetime of
abuse.
Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and
anodized. The locking LaRue Speed Levers provide outstanding return to zero; the
optic can be removed, and replaced, without loss of zero. Guaranteed.
Ring Sizes: Available with: 35mm, 34mm, 30mm or 1" rings
MOA: Available in 10 or 20
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913
rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt
that draws up a clamping foot against the lower angle of the rail, seating the
mount similarly to a fully-closed LaRue lever. Once installed on the firearm,
index marks allow the user to remove the mount, then reattach to the same
tension, providing unprecedented return to zero for a non-QD-levered mount. The
unique vertical alignment of the clamp allows components that are structurally
stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the
rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term,
semi-permanent mounting alternative to our well-known Speed Levers. While both
mounts will allow the user to remove the mount from the weapon, reinstall it in
the same position, and return to zero, the VFZ™ mount is intended for users that
will not need to constantly remove and install their mounts (especially in the
field).
I ordered the scope mount along with the mounts for my Aimpoint PRO and magnifier. I mounted this scope mount to my AR10 that I put together to hold my IOR. Outstanding mounts on all three. Unparalleled craftsmanship and durability. I don't baby my rifle or carbine, and these are what I needed.
And LaRue stands apart in service. They sent me my order very quickly, and threw in some goodies for lagniappe. I've used the rub on chicken and ribs, and open a beer with the dillo after shooting.
LaRue Tactical Scope Mount QD LT745
The LT745 places the centerline of the optic 1.5" above the top of the rail for optimum cheek weld with a variety of flat top rifles. The cantilever positions the scope out front over any handguard or barrel nut, eliminating the need to span from the receiver to the handguard. The cantilever also allows the shooter to obtain proper eye relief.
The popularity of the SPR series of mounts is partially due to the innovative backbone that connects the split vertical rings. This design provides a more robust platform for the optics, increases repeatability, and eliminates the need for time-consuming lapping. The rings are precision-machined with the tightest tolerances, and feature threaded steel inserts, built to withstand a lifetime of abuse.
Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and anodized. The locking LaRue Speed Levers provide outstanding return to zero; the optic can be removed, and replaced, without loss of zero. Guaranteed.
Ring Sizes: Available with: 35mm, 34mm, 30mm or 1" rings
MOA: Available in 10 or 20
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).
Post new Review