LaRue Tactical Aimpoint Micro Mount LT660, LT660HK or LT661

4.95412844037
Reviews
 
$107.00
SKU: LT660

LaRue Tactical Aimpoint Micro QD Mounts
One of our most popular series of mounts. Our LT660 (for the T-1 and H-1) come in three different heights, as listed below. We also offer the LT751 in an absolute cowitness height. Like all LaRue mounts, they are precision-machined out of bar-stock aluminum and matt black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding return to zero; the optic can be removed, and replaced, without loss of zero. Guaranteed.

Each mount comes complete with replacement mounting screws with wrench, QD adjustment wrench, vial of blue Locktite and Instructions.

Sizes:

1/3 Co-Witness (LT660)
Allows a 1/3 co-witness with the Iron Sights on M4 Carbine and AR-15 Flattop.

Lower 1/3 Co-Witness (LT660HK)
Provides Lower 1/3rd Co-witness with iron sights when using HK Height iron sights
This will NOT give you absolute co-witness with iron sights if used on a regular AR-15.

Short Shotgun, PS90 & AK (LT661)
QD Mount for Aimpoint Micro Sight. Gets the Micro down low to use on Shotguns, PS90's and AK's

About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.

Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).

704
5
233 out of 382 people found this helpful.
Reviewed by Henny 3 years ago
Excellent mount for an excellent optic! I've been carrying this mount on my patrol rifle for several months and it has been rock solid!
Login to rate this review.
642
5
211 out of 375 people found this helpful.
Reviewed by Anonymous 3 years ago
I currently own a total of four Aimpoint Micro Mounts and its the only mount I use for T-1/H-1 optics.
Login to rate this review.
5914
5
186 out of 329 people found this helpful.
Reviewed by Anonymous 1 year ago
What can I say? The LaRue mount for the Aimpoint T1 is the best you can get. The competition makes outstanding alternatives, but they are simply not as perfect or simple to use. I teamed my T1 with the LaRue Back Up Iron Sight QD LT 103 and I love the combination. My buddy owns a similar set up from an outstanding competitor, and he still admits my LaRue set up is easier to use. Great stuff!
Login to rate this review.
1243
5
187 out of 333 people found this helpful.
Reviewed by Brannons19 3 years ago
High quality, great returns to zero, and tough... what more could you ask for? I used this on my AR15 with the fixed front site it was great, I prefer the absolute zero for AR15s without the fixed front site.
Login to rate this review.
6211
5
181 out of 324 people found this helpful.
Reviewed by Anonymous 1 year ago
I purchased the LT660 Aimpoint mount because I wanted the option of co-witness with my back-up iron sights on my ARs. I noticed several on-line vendors advertised these mounts. When I called LaRue they were immediately available to answer my questions, were patient and knowledgeable. I felt no pressure whatsoever, they just wanted to educate me on the product. LaRue offered the best price and I had a high level of confidence in the LaRue name and reputation. The mount arrived in a timely manner and it was the real deal - no cheap knock-off from China. What I found most impressive was what else was in the box: a Dillo beverage entry tool, several copies of the Constitution, bumper stickers and a bottle of Dillo Dust (dry barbeque rub). LaRue's customer loyalty and service is above and beyond. This is a great company!!
Login to rate this review.
3365
5
202 out of 367 people found this helpful.
Reviewed by Anonymous 3 years ago
LT660HK on a SIG 556 with Troy mini folding battle-sights works like a dream. The mount allows for a low 1/3 co-witness, after 1000's of rounds no complaints and no problems as of yet. This mount will continue to work for years to come. Thanks LaRue
Login to rate this review.
6248
5
172 out of 310 people found this helpful.
Reviewed by Anonymous 1 year ago
Rock solid mount. It's set on my BCM 11.5 upper with Troy flip-ups and an Aimpoint T-1. My perfect CQB set-up. These are some of the best mounts i've used.
Login to rate this review.
7383
5
190 out of 347 people found this helpful.
Reviewed by Anonymous 1 year ago
Well worth the extra shipping I paid. After removing the T-1 factory mount I placed it on my AR and made the most boot of mistakes. I put it on with the lever facing forward! Actually with the way this thing grips it doesn't matter, but I learned in '69 whatever can snag on a natural surface can be a pain in the rear. Outstanding quality and ordering without petty drama. Looking forward to doing business in the future! Anonymous
Login to rate this review.
3597
5
204 out of 376 people found this helpful.
Reviewed by Anonymous 3 years ago
Of course the mount is amazing! What I didn't expect was the swag in the box. Looks like others have gotten random LaRue stuff as well. Going to try out the rub on the grill this weekend!
Login to rate this review.
6801
5
195 out of 359 people found this helpful.
Reviewed by Anonymous 1 year ago
+100 for use with a vortex sparc. The locking cam works great and will withstand abuse, is easy to use with numb fingers in subzero weather, and the mount stays well within 1moa at least. I cannot say more, as that's the limitation of my vision with the sparc. At 100 yds, it holds between mountings within my ability. More impressive was the Tactical NY SAFE Survival / Sympathy Supplies that were included. The items do not appear on the packing list, which is good as most of them are banned in this state - possessing multiple copies of the Constitution is begging to get people arrested for Sedition, nevermind having a Tactical Beverage Opener with flagrantly naked serrations. All in all, great stuff.
Login to rate this review.
6912
5
169 out of 308 people found this helpful.
Reviewed by Anonymous 1 year ago
The mount was very good quality. It was exactly what I would have expected from LaRue based on what I had heard about the company. The mount was easy to install and came with all the tools to set it up and adjust the tension if needed (did not need to). They still managed to surprise me though with beverage entry tool, dillo dust, stickers, and copies of the constitution. I am very impressed and will be a customer for life. I am just looking for an excuse to purchase from LaRue again.
Login to rate this review.
4326
5
199 out of 374 people found this helpful.
Reviewed by Anonymous 2 years ago
Another quality product from LaRue. Rock solid and well crafted. I got the LT661 Low Mount Aimpoint T1 combo. Service and perks, as usual, was great. The only downside (and I may be the only person in the world who cares about this) is that even the low mount, when perched on an Ultimak rail/tube on an AK results in the red dot sitting too high for an effective cowitness with iron sites. The metal on the base of the mount is almost 1/4" thicker than most other (cheaper) products. While this offers a higher degree of insulation from heat that the Ultimak can produce, the resulting cowitness is virtually useless. Not the product's fault, just know your application.
Login to rate this review.
6206
5
191 out of 360 people found this helpful.
Reviewed by Anonymous 1 year ago
What can I possibly say that hasn't been said already. If you were smart enough to buy an Aimpoint, then you're smart enough to put it on an outstanding mount like this. It's a no brainer.
Login to rate this review.
655
5
188 out of 355 people found this helpful.
Reviewed by Anonymous 3 years ago
The LT660 is an absolute top quality, rock solid mount! A definite must have item if you require a lower 1/3 co-witness mount for your Aimpoint T1/H1. In addition to this mount, I also run the LT751 absolute co-witness on another rifle and of course is also a rock solid Laure product. RTJ - Las Vegas, NV
Login to rate this review.
4926
5
183 out of 351 people found this helpful.
Reviewed by permanent37 2 years ago
I've had the same Aimpoint for a year or so and this is my third and final mount, this thing is bomb proof. Also a big thanks to Larue for their great customer service and all the goodies they included with my mount. Looking forward to doing business with you guys again.
Login to rate this review.
5447
5
187 out of 360 people found this helpful.
Reviewed by Anonymous 1 year ago
Big Fan of LaRue here! This mount is perfect. As beefy as you can get for that little Aimpoint T-1 and a great way to stay light. I've been buying this stuff left and right and I haven't been disappointed because the products are great and the service is great and they're located right here in our own great Nation. Thanks for making this kind of quality available to the average Joe.
Login to rate this review.
4215
5
169 out of 325 people found this helpful.
Reviewed by Anonymous 2 years ago
Not being a former SEAL, the staff took their time to educate me on the best configuration for my rifle, and then over-delivered in all regards. I will recommend them to any and all, great to business with fellow patriots.
Login to rate this review.
643
5
181 out of 349 people found this helpful.
Reviewed by Johndal21 3 years ago
I own a total of four Aimpoint Micro Mounts and it is the only mount I utilize for T-1/H-1 optics.
Login to rate this review.
5622
5
170 out of 329 people found this helpful.
Reviewed by tgb9543 1 year ago
I love this mount. I bought this to replace the Daniel Defense mount that came with my Aimpoint Micro simply because I like the way it looked. It is a rock solid product and I have to agree with all of the positive reviews for this product. This site had the lowest price anywhere and they also sent a few extras that sweetened the deal. Not to mention the quick shipping. You got it right on this on LaRue. I'm 36 years old and this is the first review that I have ever written if that tell you how impressed I am with this product! Keep up the great work LaRue.
Login to rate this review.
7439
5
164 out of 318 people found this helpful.
Reviewed by Anonymous 1 year ago
What a great product! It comes with everything you need to install your Aimpoint Micro and only takes a few minutes to install. Quality looks fantastic and is a breeze to put on and take off. Another plus to ordering from Larue, is all the goodies you get inside the package. You have a customer for life.
Login to rate this review.
6841
5
170 out of 331 people found this helpful.
Reviewed by Anonymous 1 year ago
A well engineered and manufactured assembly. I should know, I'm a mechanical engineer. The amount of abuse required to damage the mount would destroy the optic and likely damage the rifle significantly as well. Y'all keep up the good work!
Login to rate this review.
3931
5
168 out of 327 people found this helpful.
Reviewed by donahue92485 2 years ago
Ordered the LT660hk for my Scar and it is ROCK SOLID!!! This was my first order from LaRue and I am impressed. I ordered Friday and picked it up Tuesday.
Login to rate this review.
7349
5
189 out of 370 people found this helpful.
Reviewed by pfjdrvr3791 1 year ago
All I can say is I got what I paid for. Every LT product I've purchased has the same "High Standard" quality. This is one pleased customer.
Login to rate this review.
7435
5
154 out of 301 people found this helpful.
Reviewed by Anonymous 1 year ago
Awesome mounts! I have a Larue scope mount and this micro t1 mount that I use back and forth on 1 ar15 and I can always count on my zero not shifting.
Login to rate this review.
6523
5
180 out of 358 people found this helpful.
Reviewed by Anonymous 1 year ago
this is a great product for a great price love doing business larue tactical thank you for such a great product
Login to rate this review.
7759
5
40 out of 80 people found this helpful.
Reviewed by Anonymous 1 year ago
Login to rate this review.
6591
5
163 out of 326 people found this helpful.
Reviewed by Anonymous 1 year ago
The 660hk mount I order worked perfect with my budget PA red dot (gen6). It full cowitnesses with magpul mbus when used with this optic. The lock up on these mounts is just rad. Thanks larue for engineering a killer product!
Login to rate this review.
6168
5
162 out of 325 people found this helpful.
Reviewed by Anonymous 1 year ago
Love it! There is no better way to go. Larue gets the job done right with nothing to complain about.
Login to rate this review.
5910
5
151 out of 303 people found this helpful.
Reviewed by Anonymous 1 year ago
Great service from LaRue, additionally lots of nice stuff in the box. The mount is top tier, rock solid and easy to mount. The low 1/3 co-witness is dead-on. Will I continue to buy from LaRue? Heck ya! Excellent product and service.
Login to rate this review.
4134
5
171 out of 343 people found this helpful.
Reviewed by Anonymous 2 years ago
Rock solid, easy install and removal, keeps zero when removed. Not the lightest option for t1's but you cannot go wrong with this mount.
Login to rate this review.
5350
5
159 out of 320 people found this helpful.
Reviewed by vettekrazy 1 year ago
I bought the LT660HK mount for my SBR with Troy Micro sights. This set up on my 11.5 inch SBR provides a perfect 1/3 co-witness. You can fold the sights down and they disappear from your sight picture. The mount is rock solid, easy to attach to my Aimpoint Micro T-1, I'd expect nothing less than LaRue. Return to zero was dead on, I don't know how much weight reduction you get with the LT660HK vs. the LT660 but every ounce counts and the sight mount combo is by far the lightest optic set up I own. One other note, when I ordered the LT660HK I was considering the LT751 as well, after speaking with customer service I rolled the dice on the LT660HK knowing they would trade it out in a heartbeat if it did not work for me. Every optic I own is mounted to my rifles with LaRue Tactical mounts. Buy once, be happy.
Login to rate this review.
3739
5
172 out of 347 people found this helpful.
Reviewed by yossi86 2 years ago
First lets start with the service. I placed my order late Thursday night, Friday morning I receive an email that my mount has shipped out and Monday the mount was delivered. They manufacture a top notch mount that is extremely durable. I will take this one to battle any day. Can't forget to mention all of the swag that comes along in the package. From the Dillo bottle opener to the Dillo dust. All in all it was a great shopping experience and Y'all earned a customer fr life!
Login to rate this review.
7742
5
32 out of 68 people found this helpful.
Reviewed by Anonymous 1 year ago
This is my second LT 660 1/3 co witness. Two seconds to secure my T1 and only slightly longer to zero. They are rock solid. Easy to place and remove and they hold zero perfectly. I would buy more... but first I will have to buy a few more AR's.... as soon as I get a larger safe. Oh well! :)
Login to rate this review.
2981
5
179 out of 362 people found this helpful.
Reviewed by Anonymous 3 years ago
Absolutely, literally the only mount you should ever use, period. Anything other than Larue is a compromise.
Login to rate this review.
6753
5
168 out of 344 people found this helpful.
Reviewed by Anonymous 1 year ago
This product reserves a special place in my heart when it comes to mounting my Aimpoint Micro. LaRue's quality guarantee "return to zero" mount for the aimpoint micro is no joke. Test it and you'll quickly find out they weren't kidding. This provides such an advantage to the modern rifleman.
Login to rate this review.
6881
5
154 out of 317 people found this helpful.
Reviewed by Anonymous 1 year ago
I have a few of the LT660 mounts set ups -This is the perfect T1 mount set up in my opinion-it better allows me to run NVG. Total lock down and reliability that the optic is solid and will hold true! You can't beat this combination. Also, the customer service from Larue is TOP Notch! Absolute Pros!
Login to rate this review.
3679
5
173 out of 356 people found this helpful.
Reviewed by claytoncassidy 2 years ago
Got my mount in today. Some great stickers, some rub for some meat, and a few more extras. Why order anything other that LaRue? If it's not made in Texas, then it's not worth buying. Made in USA? Good. Made in Texas? Better. I gotta get a LaRue rifle now that I stumbled upon their greatness.
Login to rate this review.
6295
5
154 out of 319 people found this helpful.
Reviewed by Anonymous 1 year ago
Great mount! I bought this mount to couple my Primary Arms red dot to my AR-15. Works like a charm, and it held zero just as promised even after re-attaching it several times. I've only shot about 150 rounds through this setup, but I expect it to outlive anything else on the gun. The quick-disconnect system on this mount has a nice solid feel and a very positive locking mechanism which can't be beat. You could spend less elsewhere, but you'll be kicking yourself later. I wish LaRue built cars and trucks, too!
Login to rate this review.
5961
5
166 out of 344 people found this helpful.
Reviewed by Anonymous 1 year ago
Purchased the bundled package of a Aimpoint T-1 and The LT660- Great package that light weight and compact- as always- it shipped quickly and a rock solid combo! Buying another package for my other AR! Thanks for the Dillo Dust its delicious and the Dillo bottle opener is a great useful tool!
Login to rate this review.
7644
5
60 out of 136 people found this helpful.
Reviewed by EthanMcD 1 year ago
What a great mount. I got it a little bit over a week ago and so far, so good. Zeroed my optic and then did my own toture test on it. Put 400 rounds of 308 through the rifle, zero stayed true. Took it off my SCAR and then threw it into the field. Dusted it off, clamped it back into position, and 100 rounds later,still zeroed. quite impressive. By far the best mount I've used. Also, wanted to comment on LaRue as a company. Thank you for all the extra goodies in the box. Customer for life now. Great company and even better products.
Login to rate this review.
5774
5
163 out of 342 people found this helpful.
Reviewed by Anonymous 1 year ago
I got the LT660 for my Aimpoint H1 and it mounts perfectly to the Tavor and still allows for the factory iron sight co-witness.
Login to rate this review.
7575
5
86 out of 189 people found this helpful.
Reviewed by Anonymous 1 year ago
I was so impressed I called to thank them for their quality and innovation. LaRue gives me a total confidence. You don't have to worry about ypur optics lock up at all. Nothing else will sver go on any of my other systems. Thank you all for your pride innovation and craftsmanship, which are in short supply theese days. Please continue your commitment to excellence..
Login to rate this review.
6070
5
160 out of 337 people found this helpful.
Reviewed by Anonymous 1 year ago
Im using this with a Vortex SPARC..Excellent pc..Top Quality this is my 1st purchase from Larue and wont be my last all around outstanding from order to opening all the great stuff they include Thanks Larue
Login to rate this review.
653
5
154 out of 327 people found this helpful.
Reviewed by Anonymous 3 years ago
Absolute top quality, rock solid mount and a definite MUST HAVE item if you are running an Aimpoint T1/H1. RTJ - Las Vegas, NV
Login to rate this review.
7104
5
160 out of 340 people found this helpful.
Reviewed by Anonymous 1 year ago
Got this after online review of a few different products to mount a T1 to a Benelli SBE2 for turkey hunting. Used an Evolution Gunworks rail which fit perfectly. Held the sight well during sighting in. Larue products exude quality and are easy to use. Dillo dust and bottle opener armadillo are nice perks. This is my second Larue mount and they will continue to be my default option for future mounting needs.
Login to rate this review.
6005
5
177 out of 374 people found this helpful.
Reviewed by Anonymous 1 year ago
No better micro mount exists, unless you want absolute co-witness then get the other offering. Larue mounts are tough, light, simple and well thought out. When your equipment cannot fail, buy equipment that will not fail.
Login to rate this review.
5984
5
141 out of 302 people found this helpful.
Reviewed by Anonymous 1 year ago
We currently have 23 LT660 mounts, 2 LT660HX and 2 LT661 mounts in service, and have used them since they were first offered. We get to see several hundred students a year come through our carbine classes, and they will bring with them a lot of equipment for their carbines. The LT mounts are the only ones we have seen that have never failed. There is a reason why we use the Larue Tactical Mounts. And it is pretty simple- we can reply on them... Pat Rogers EAG Tactical
Login to rate this review.
7481
5
130 out of 281 people found this helpful.
Reviewed by limpdog 1 year ago
My pro shop warned me about cheap mounts, I tried 3 different mounts and all had issues with staying snug even with red locktite. Well i spent a little ext a money and this is my first LaRue product and all i can say is that I am amazed! Fit snug right out of the package no adjustment needed. Went to range and zeroed and and did some shooting and after 200 rounds still snug and solid. LaRue you have a customer for life. Side note: Put some dillo dust on a steak last night and it was delicious, you guys rock!
Login to rate this review.
7588
5
84 out of 191 people found this helpful.
Reviewed by Anonymous 1 year ago
Easy to install and remove. Very well made product. Would definitely buy from LaRue again!
Login to rate this review.
6479
5
160 out of 344 people found this helpful.
Reviewed by Anonymous 1 year ago
Nicest mount I've used. Re-establishes zero every time, even after hundreds of removals. Many thanks!
Login to rate this review.
5664
5
166 out of 356 people found this helpful.
Reviewed by clyderhoads 1 year ago
I have this for my T-1, It as rock solid as the get. One thing i love about my LT660 is the fact that i can store extra batteries for my T-1 in the open spaces in the mount. I heat seal them in a plastic baggie corner, and slide one battery in each hole, then mount the optic on my rifle. Its out of sight and out of mind until your optic goes dead, then you'll be glad you have spares on hand.
Login to rate this review.
7438
5
137 out of 302 people found this helpful.
Reviewed by Anonymous 1 year ago
Ordered and received my LT660 1/3 cowitness mount for my Aimpoint H-1 in record setting time. Communication with the good people from LaRue was exceptional! My mount was packed to withstand a storm! And boy was o surprised at all the free goodies! I can't wait to purchase something else from them!
Login to rate this review.
5743
5
143 out of 316 people found this helpful.
Reviewed by Anonymous 1 year ago
I bought the LT660 mount as a combo with the T-1 micro a few years back for my 10.5" pistol, but found it too tall for a pistol setup, since I have no stock to act as a cheek-riser. Sent it back and LaRue exchanged it for the HK height mount (which may not be a perfectly centered absolute co-witness sight picture, but it now has proper cheek weld and works great.), and even swapped my T-1 micro onto the new mount for me, and returned no questions asked... and FAST. Terriffic service and great product! I've since had this mount on and off the gun a hundred times, and it always locks-up solid and returns to zero EVERY TIME. The T-1/LT660 HK combo is totally reliable and consistently accurate even at distance. Couldn't be happier with both, even after years of use. Getting ready to buy a new LaRue scope mount for my precision AR now, and I am sure it'll be just as high quality.
Login to rate this review.
6931
5
160 out of 351 people found this helpful.
Reviewed by Anonymous 1 year ago
This is as good as it gets! I have had these before and they have always been great. They return to zero no problem. I ordered the HK one this time for my MR556. I was super impressed with the way it was milled out to save weight. It spend 4 days of hard abuse being knocked around in a jeep and bouncing off my gear. Not one single issue and as accurate as always. Thanks Larue! You make a solid product and I am a customer for life! And they always ship super fast.
Login to rate this review.
6085
5
151 out of 334 people found this helpful.
Reviewed by Anonymous 1 year ago
Best mount for the T1 hands down. It lines up perfect with my PVS14, retains zero when removed, retains zero when getting beat to heck in my patrol SUV and locks solid every time. Then add how many goodies Larue puts in the box, their excellent service, fast shipping and it makes for an overall good experience.
Login to rate this review.
7394
5
146 out of 331 people found this helpful.
Reviewed by Anonymous 1 year ago
There are lots of choices for spacers to stuff between your Aimpoint and your rifle and I'd buy this one every single time. I've owned several LaRue mounts and all of them have been rock solid, reliable and durable. The quick release versions have returned to zero and the non quick release stuff has stayed right where I put it and I've never seen the zero shift. LaRue builds art you can use.
Login to rate this review.
6468
5
156 out of 358 people found this helpful.
Reviewed by Anonymous 1 year ago
Excellent product and fast shipping as always. Too short for a Tavor but that's my fault not theirs.
Login to rate this review.
3213
5
162 out of 371 people found this helpful.
Reviewed by deezlbob 3 years ago
First order from Larue. HOLY COW!!! Only ordered a 660HK mount and got a box full of goodies in a couple days. Very happy with first transaction and product. Now I gotta spend more. Oh well. Mucho Thanks.
Login to rate this review.
6524
5
126 out of 310 people found this helpful.
Reviewed by Anonymous 1 year ago
this is a great product for a great price love doing business larue tactical thank you for such a great product
Login to rate this review.
4197
5
168 out of 400 people found this helpful.
Reviewed by Anonymous 2 years ago
Just wanted to add that the 660HK provides absolute co-witness with a Vortex Sparc red dot, for those who don't want to mortgage their house to get the T1 Micro. Also, very well built mount, just like everything LaRue makes!
Login to rate this review.
12294
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 weeks ago
I can see why LaRue is so popular; the name is synonymous with excellence. I placed my order by phone on a Thursday and the mount arrived on Tuesday as promised...along with a couple of 'extras.' Within minutes the mount was attached to both sight and rail. Thanks LaRue.
Login to rate this review.
12263
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 weeks ago
Please don't order your AR parts from anywhere else then LaRue. They are the best.
Login to rate this review.
12256
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 weeks ago
This is the industry benchmark for Aimpoint Micro mounts. I have 2 of these mounts for a T1 and a T2. Larue has great customer service and I love all the free stuff they give on orders. It's like Christmas every time I get a Larue package.
Login to rate this review.
12101
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 4 weeks ago
The only thing better than the quality of the LT660 is the sevice from LaRue Tactical. I couldn't believe all the goodies that came with my order. I mounted and sighted in today with the LT660 and am extremely happy with this product. I'm a machinist so I know quality when I see it. Thanks again, you have certainly earned more of my business.
Login to rate this review.
12007
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 6 weeks ago
Works perfect. Vortex SPARC mounted to the 660HK.
Login to rate this review.
11973
5
0 out of 0 people found this helpful.
Reviewed by Gunrunner74 6 weeks ago
I would expect nothing less than perfect from LaRue, which is what I got I'm my LT660 mount and their customer service. Ya'll ROCK!!! Keep doing what you're doing. This is the best mount for my total of three Aimpoint T-1 Micro Sights. I won't use anything but LaRue mounts just for the simple fact that they are built rock solid and they just plain work. Thank you for being a fantastic American Company!!! We need more like you. Oh, and your meat rub is awesome. Thank you for that.
Login to rate this review.
11907
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 7 weeks ago
C'mon it's LaRue. Awesome, well made product you could take into battle. 'Merica!!!
Login to rate this review.
11783
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 8 weeks ago
As usual great customer service from LaRue. The LT660 fits like a glove and holds zero no problem along with my flip up sights makes a great combination.
Login to rate this review.
11590
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 11 weeks ago
It feels as tho no pressure is being asserted, but yet, a firm tight grip created on the rail. One smooth motion without the pressure build up sensation of a clamp. If you ask me I would say its not made in America. I would bet it was made in Switzerland or Germany.
Login to rate this review.
11549
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 12 weeks ago
Excellent workmanship and absolute perfect snug fit on the rail. I love that it holds zero when you remove your optic using the quick release and then reattaching it.
Login to rate this review.
11536
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 12 weeks ago
Quality, fit and function are excellent!
Login to rate this review.
11411
5
0 out of 0 people found this helpful.
Reviewed by georgeca 14 weeks ago
This is the mount to use with your aimpoint micro! Maintains zero and looks like it can take a beating. Also best customer service in the industry. Cannot go wrong with this sight!
Login to rate this review.
11401
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 14 weeks ago
Retains zero after being removed. Very sturdy.
Login to rate this review.
11197
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 17 weeks ago
My first order and I am very pleased.
Login to rate this review.
11186
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 17 weeks ago
Quality mount! I went from absolute co-witness to lower 1/3 and I love it! The positioning feels a lot more natural and comfortable.
Login to rate this review.
11011
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 20 weeks ago
The only optic mounts I use are Larue. The highest quality, holds perfect zero, and Larue's customer service is awesome. This is my second LT660 mount and as expected, flawless. Don't waste your money on other brands, go spend it on a Larue mount, you won't regret it. Plus there made in Texas, everything is better in Texas.
Login to rate this review.
10694
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 24 weeks ago
Excellent mount! Very sturdy and holds zero after removing and remount several times. I have several Larue products and have never been dissapointed with any of their products!
Login to rate this review.
10630
5
0 out of 0 people found this helpful.
Reviewed by Venom556 25 weeks ago
Great mount. Shipping was pretty fast. As always you are in for a treat whenever you order from Larue. Im always impressed with the extra goodies they send you. Mount returns within 1/2 moa of zero @50 yds in my experience. Removed and verified zero 3 times in a row! If you have problems finding out where to store extra batteries on your AR like i was, you can put 'em in a ziploc bag, melt the edges together and throw 2 under the lower 1/3, LT660 mount. Again, extremely well built mount with an amazing return to zero! Will definitely be ordering a 4th time from Larue Tactical!!
Login to rate this review.
10599
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 25 weeks ago
Great mount & even more impressive was the customer service. The UPS driver left the package at wrong house. I needed mount for the week-end so Tim in shipping had a replacement at my house the next day. Many companies take care of there customers like this. Customer for life. Great job Tim & Larue!
Login to rate this review.
10551
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 26 weeks ago
Great mount. It holds it's zero extremely well. Great quality and customer service as always from LaRue.
Login to rate this review.
10476
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 27 weeks ago
Ordered this 660 mount for my Patrol Duty AR. This gets tossed in the car and into a rack and bounced all day long. Mount is very sturdy and comes with extra screws and an allen wrench plus lock-tite. Everything you need to mount this to your Micro T-1. Very pleased, I also put two extra batteries in sealed baggies in the underside of the mount for times when you need it. I would order again in a minute from Larue. Thank you again
Login to rate this review.
10375
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 28 weeks ago
Not only does LaRue Tactical make incredible mounts which is reason enough to purchase products from them, they also send a ton of really cool swag with your purchase. And on top of all that, the shipping was extremely fast! I couldn't be happier with my new mount and LaRue Tactical itself!
Login to rate this review.
10286
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 29 weeks ago
Purchased this for my aimpoint H1, price was right, the mount is solid, the representative was extremely knowledgeable in the products. I'm very pleased with the product and service. I will be a repeat customer, very proud to have a company based right here in the heart of Texas.
Login to rate this review.
10279
5
0 out of 0 people found this helpful.
Reviewed by mbonamico 29 weeks ago
This is perfect- I just purchased a Vortex Spark II and the mount that it came with was less than desirable. After doing some research even though this is made for the Aimpoint- it fits and works for the SPARK! Which makes this guy happy!! Having the ability to QD a red dot so you can then use your iron if needed is awesome! Solid product, solid service, solid mount! Thanks!
Login to rate this review.
10159
4
0 out of 0 people found this helpful.
Reviewed by Anonymous 31 weeks ago
great products from larue, just wish the anodizing was smoother.
Login to rate this review.
10066
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 32 weeks ago
The LT660HK is a great option for mounting a SPARC II on an AR with absolute cowitness! The part itself is really great quality! it just feels like it belongs on a gun, and that it will perform its function very well for as long as the gun is around. This is my first time ordering from this company and i was really impressed! i ordered 2 small parts and they cam in a medium sized box with all kinds of other little extras. really great experience overall.
Login to rate this review.
10054
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 32 weeks ago
Top notch product !!!! Rock solid mount !!!! I'm a customer for life
Login to rate this review.
9830
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 35 weeks ago
Wow, you guys really know how to treat a new customer, my QD Aimpoint T1 mount came in perfect, thank you. And all the unexpected extras in the box were the icing on the cake my friends. You can now add me to your list of satisfied customers, and I will be back for more. Merry Christmas to the team.
Login to rate this review.
9800
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 35 weeks ago
Perfect. Exactly what my husband wanted! And the item came with a few other bonus goodies (meat rub, stickers, etc.)
Login to rate this review.
9716
5
0 out of 0 people found this helpful.
Reviewed by Jonathan Lovelace 36 weeks ago
Top notch mount. As usual, LaRue service is top tier...as is this product. Bought the LT660 to use with a Primary Arms MD-ADS. The MD-ADS mounted right up easily. That model delivered perfect lower 1/3 co-witness when used with Magpul MBUS sights on my AR. The mount is very well made and extremely lightweight despite its stout appearance. The locking quick release mechanism is strong and locked in tight as a drum right out of the box. I love the thing so much, wish I needed more mounts at this point...I will never hesitate to use or recommend this superb company to anyone with an ear. Thanks again!
Login to rate this review.
9688
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 36 weeks ago
First order with LaRue and was not disappointed. Called direct to verify which mount would work best on my Tavor completely expecting operator to pass me off to voice mail, but instead I got my answer instantly with a live person. I about dropped the phone in disbelief. I would completely think about doing business with this company again.
Login to rate this review.
9548
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 37 weeks ago
LT661 mount is exactly what I wanted for my new Zastava PAP M92 with midwest industries rail! The mount is excellently built as always from Larue! On another note we ran out of Dillo Dust and I had to place an order ; ).. Love the little extra goodies Larue throws in the box!
Login to rate this review.
9467
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 38 weeks ago
Sent my mount super quick with some extra swag! When does that ever happen?? God bless good Americans. I went to their site and shopped for more stuff due to the gesture...
Login to rate this review.
9438
1
0 out of 0 people found this helpful.
Reviewed by Mwalex3012 39 weeks ago
I ordered a LT661 to mount an Aimpoint H1 on an Ultimak optic mount for an AK. The LT661 does not fit onto the Ultimak easily and will mar the mount badly if you try to force it. It looks as if the Ultimak rail is thicker than a milspec 1913 rail. This was in no way LaRue's fault, I assumed the mount and rail would fit so I did not call before ordering.
Login to rate this review.
9437
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 39 weeks ago
Rock solid, perfect height! Typical LT quality!
Login to rate this review.
9159
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 43 weeks ago
I cannot come up with anything better to say about Larue products and services that haven't already been said.
Login to rate this review.
9104
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 45 weeks ago
Fantastic mount. I had a KAC mount. It was fine. But this mount is lighter, locks down to the rail better and just looks better! I'll be getting another. And, their scope mounts are top-notch too. All the extra swag they threw in the box was awsome.
Login to rate this review.
8810
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 49 weeks ago
I've taken it on and off several times now! Perfect fit, repeatable zero every time. mounted on Benelli m4
Login to rate this review.
8786
5
0 out of 0 people found this helpful.
Reviewed by Dannykachun 50 weeks ago
One of the best QD mounts for the t1/h1 to date!
Login to rate this review.
8735
5
0 out of 0 people found this helpful.
Reviewed by nikols 50 weeks ago
I have the LT660HK with QD and I love it. Absolute co-witness with my Vortex Sparc with an AR-15 platform. Always holds zero. I couldn't expect better.
Login to rate this review.
8641
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
I got the 1/3rd Co-Witness non-QD sight base for my new AIMPOINT Micro T-1, it is an incredibly sturdy base, I grabbed a "Tango Down" cover for the T-1 to also help protect my investment, long story short, I'm definately impressed at the quality of the products from LaRue Tactical and will definately be doing business with them again in the future!! WRENCH (Texas State Militia)
Login to rate this review.
8633
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
There is nothing the Larue crew make I don't find absolutely wonderful. thanks for all your hard work. I own 2 LT660 mount and looking at another mount for my 1x4. Top shelf all the way!
Login to rate this review.
8560
5
0 out of 0 people found this helpful.
Reviewed by youngthegreat 1 year ago
I have used two T1/H1 mounts (LT660- 1/3 co-witness and LT660 low mount) and they are by far the best mounts for the Aimpoint Micro on the market. Solid fit with the provided screws and loctite ensures that the mount marries up perfectly with the optic. I used the 1/3 co-witness on an AR15 until I decided to move the aimpoint to a PS90. It remains there today on the low mount. Both setups have exceeded expectations and complement the lightweight aimpoint micro sight perfectly. All necessary instructions are included with the optic, but one thing to keep in mind when using the low mount is to adjust the tensioning screw (on the locking lever) on the rail prior to mounting the aimpoint on there. Once the aimpoint is on you cannot tighten the screw using the supplied tool (you can use a gerber or similar tool at that point).
Login to rate this review.
8493
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Awesome product!
Login to rate this review.
8208
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Awesome QD mount, works perfect on my Vortex sparc!
Login to rate this review.
8094
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Awesome mount! The 660Hk provides a 1/3 co-witness with factory Dioptic sights on my MR556. Couldn't be happier.
Login to rate this review.
8062
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Purchased the LT661 mount for my Benelli M4 and could not be more pleased. I really want to first comment on your pride in shipping. Extremely impressive. A company that takes such pride in something as small as shipping has my support. The mount of course is exactly what I expected. I will recommend LaRue to all my law enforcement community.
Login to rate this review.
7957
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
First order from Larue! Wow! Got the 660hk and man I sure am happy! Also, love the bumper stickers, bottle opener that they sent for free. Makes me proud that they are a Texas company. Thanks Larue!
Login to rate this review.
7793
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Rock solid, repeatable zero when removed. Does not move period. Can't beat this mount if you want a QD mount.
Login to rate this review.

Post new Review

Please leave a star rating for your review.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Web page addresses and e-mail addresses turn into links automatically.

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.