LaRue Tactical

Home ›› Parts & Accessories ›› Handguards / Rails ›› AR15 Handguards

LaRue Tactical 11" Handguard FULL LENGTH LT15-11FL

0
Your rating: None
   | Reviews
 
$299.00
SKU: LT15-11FL
  • Description
  • Features
  • Reviews
  • Instructions

LaRue Tactical 11" Handguard LT15-11FL
Ideal for rifles in the 16" range. The 11.0's length stops just past mid-length gas blocks providing true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures.

Comes complete with Allen wrench, vial of blue Locktite and Instructions.

  • Weighs .992lb
  • CNC-machined out of aluminum
  • Integral QD sling-swivel sockets on both sides
  • Hard coat anodized, with T-Numbers
  • Low-profile bottom and side rails
  • Special rail cuts allow both mil-issue and standard rail covers
    • Re: LaRue Tactical 11" Handguard FULL LENGTH LT15-11FL
    Thu, 2011-11-17 16:44 — Anonymous
    Your Rating: 
    5
    Just got this in yesterday and it is flawless. the finish is perfect and it fit together very easily. installation only took me 30-40 min. mounted perfectly level with my flat top upper. thanks Larue!
    No votes yet

    Post new Review

    Please leave a star rating for your review.
    • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
    • Web page addresses and e-mail addresses turn into links automatically.

    CAPTCHA
    This question is for testing whether you are a human visitor and to prevent automated spam submissions.

    HANDGUARD ASSEMBLY INSTRUCTION

    WARNING! MAKE SURE YOUR FIREARM IS UNLOADED COMPLETELY WITH NO ROUNDS IN THE CHAMBER AND NO MAGAZINE INSERTED. THE WEAPON SHOULD BE SAFE AT ALLTIMES.

    Installation of the LaRue® free-float rail system
     
    Please Supply these instructions to your professional Gunsmith

     


    Handguard Rail
    Handguard Nut
    Barrel Nut
    Spacer

    Keeper(anti-rotation device)
    8-32 x .80 SHCS 2ea.
    Vial of Blue LocTite®
    Uncle Mike’s® Sling compatible Swivel insert

    Tool Requirements
    · Armorer’s wrench · Action Block · Punch Set · Moly Grease · 9/64 L Hex wrench · Strap Wrench
     


    1. Remove the upper from the rifle. Remove the Handguard. Remove the muzzle device. Remove the front sight base. Unscrew and remove the factory barrel nut and delta ring assembly (you won’t need these)

    Note: On certain Action Blocks, it May be necessary to Dremel® out an area to accommodate the “Keeper” during installation


    2. Next, Place the “Keeper” on the upper receiver, slip on the “Handguard Nut”, then the “Barrel Nut”

    3. Add a small amount of Moly Grease to the receiver threads. The “Barrel Nut” is installed just like any other; you snug it up three times, then torque it until the next gas tube hole aligns correctly

    4. Install the Spacer.

    5. Slip on the float tube and tighten the “Handguard nut”. The tube will align itself with locating pins already in the float tube. Use a strap wrench to get the Handguard Nut” tight.
    ABOUT

    LaRue is known world-wide for sniper targets, quick-detachable mounting solutions and hyper-accurate 7.62mm and 5.56mm rifle systems.

    COMMUNITY
    CUSTOMER SERVICE
    RECENT ARTICLES
    KEEP UP WITH LARUE
    Sign Up for Our Newsletter
    * indicates required
    Close
    Copyright © 2011 LaRue Tactical
    Reg. U.S. Pat. & Tm Off.