Aimpoint Micro T-1 4MOA/M4 QD Mount Combo

Micro T-1 - No matter what your mission, the size and weight of your equipment is a critical factor. With the Micro T-1, Aimpoint has introduced an aiming system that provides the performance of our full-sized sights in the smallest package possible. Built to offer the same battle proven ruggedness as other Aimpoint products, the Micro T-1 is able to perform under extreme conditions while adding negligible weight to your weapon.

Suitable for use on Rifles, Carbines, Shotguns, Submachineguns and Handguns, the Aimpoint Micro T-1 is ideal as a stand-alone sight, and can also be piggybacked on top of larger magnifying scopes, night vision, or thermal imaging optics. The Micro T-1 can also be used by hunters and sport shooters that need night vision comptability.The performance of the Micro T-1 is optimized for use with all generations of night vision devices (NVDs), but is especially suited for 3rd generation night vision technology

With 6 NVD-compatible brightness settings and 7 daylight settings including one extra-bright setting, the Micro T-1 is ready for use around the clock.

THIS SPECIAL PRICE COMBO DOES NOT INCLUDE THE FACTORY AIMPOINT MOUNT.

Combo comes with one of the following QD mount heights (select on pull-down menu to the right)

Tall (LT660)
Allows a 1/3 cowitness with the Iron Sights on M4 Carbine and AR-15 Flattops.

Absolute (LT751)
Provides absolute cowitness with the Iron Sights on M4 Carbine and AR-15 Flattops..

Medium (LT660HK)
Provides Lower 1/3rd Co-witness with iron sights when using HK Height iron sights.

Short (LT661)
QD Mount for Aimpoint Micro Sight. Gets the Micro down low to use on Shotguns, PS90's and AK's

Note: Unlike iron sights, on MRD such as Aimpoint, you must focus on the target, NOT the dot!
Test outdoors with both eyes open ( the dot should appear fuzzy ).

Unique features of the Aimpoint Micro T-1

Ideal for rifles, carbines, shotguns, submachineguns and handguns

Weight 3.7 oz. (105g) including mount

1X (non-magnifying) parallax free optic.

Compatible will all generations of Night Vision Devices (NVD)

6 night vision compatible settings and 7 daylight settings

one extra bright for use with laser protection glasses or in bright desert sunlight.

Integral Picatinny-style base allows easy attachment to any rail.

Patent pending mount is keyed to the sight body to absorb recoil.

New ACET technology allows 50,000 hours (over 5 years) of constant operation from one battery

4 MOA dot

Hard anodized non-reflective finish.

Submersible to 80 feet (25 meters)

Precision adjustments for windage and elevation. Top of protective caps fits into holes on adjustment screws

no other tool required.

Use as a stand alone sight or piggybacked on larger magnifying, thermal, or night vision optics.

Standard features for all Aimpoint® sights

Unlimited field of view

Parallax-free and unlimited eye relief

Unaffected by extreme weather conditions

Rugged, durable construction

No hazardous materials

No laser emission that could be harmful to your eyes

Mechanical switch for speed and reliability

Increased aiming confidence

My objective lens is a little bit inclined!

This is not a broken sight! The front lens is a little bit inclined due to the fact the diode is not located in the center of the sight but it might be located either in the roof part or the lower part of the sight depending on the model. The lens and the diode are in line with one and other.

The dot in my Aimpoint sight doesn't look round. Is it defective?

If your dot does not appear to be perfectly round, the distortion is probably caused by the way that your eye perceives the dot, rather than by some mechanical defect. Due to differences in the lenses in different individuals' eyes, round objects that subtend areas near 3 minutes of angle may appear distorted in a variety of ways depending on the individual and other environmental influences. Inexpensive red dot sights sometimes have manufacturing defects that can cause the dot to be an odd shape.

A simple test that can be easily performed will allow you to determine the cause of the apparent distortion:

Turn the sight on and look through as you normally would. (This test is easiest when the sight is not mounted on a firearm, but can be performed with the sight mounted as well. Just make sure that the firearm is unloaded and pointed in a safe direction.)

While continuing to look through the sight, roll the sight on its optical axis.

If the dot's irregularities seem to revolve around the center of the dot like the spokes of a wheel, there is a mechanical defect causing the distortion.

If the dot does not roll with the sight, the distortion is caused in the way your eye perceives the dot. This is not to say that you don't have good vision. You can see clearly and still see a distortion in objects this small.

This effect is less pronounced in sights with larger dots. More people will see the dot in a sight with a 10 minute-of-angle dot as being perfectly round than will be able to see a 3 MOA dot as round.

Re: Aimpoint Micro T-1 4MOA/M4 QD Mount Combo

Tue, 2012-04-17 09:56 — rrarring

Your Rating:

This is a great optic combo, best price anywhere! You are basically getting a Larue mount for free. Fast shipping, purchased on a Thursday and it was in my hand on Saturday.

reply

Re: Aimpoint Micro T-1 4MOA/M4 QD Mount Combo

Mon, 2011-12-19 15:44 — Anonymous

Your Rating:

Count me in complete agreement with the other reviewers of this setup. I'm very pleased with the quality, function, and price of the T-1 combo. Target acquisition is immediate and it holds zero depite mutiple detach/re-mount cycles. Well done Aimpoint and LaRure

reply

Re: Aimpoint Micro T-1 4MOA/M4 QD Mount Combo

Mon, 2011-12-19 15:43 — Anonymous

Your Rating:

Count me in complete agreement with the other reviewers of this setup. I'm very pleased with the quality, function, and price of the T-1 combo. Target acquisition is immediate and it holds zero depite mutiple detach/re-mount cycles. Well done Aimpoint and LaRure

reply

Re: Aimpoint Micro T-1 4MOA/M4 QD Mount Combo

Wed, 2011-10-05 09:12 — Anonymous

Your Rating:

This is the first mount I have ever purchased, and I am totally sold on Larue products. First, this thing mounts easily and is adjusted just as easily. It maintains zero after multiple remvoval and reattaching. I am very happy with my purchase. Once mounted this thing is on there nice and solid and can be easily removed and placed on another host weapon with little to no effort. Thanks Larue!

reply

Re: Aimpoint Micro T-1 4MOA/M4 QD Mount Combo

Sun, 2011-10-02 12:51 — Anonymous

Your Rating:

I can't say enough about how good the quality of LaRue products are. I've owned a number of different mounts and rifles from LaRue. So, when they offer a package deal with a T-1 and LT660 tall mount, I jumped on it. If I had to buy the T-1 and tall mount separately, I would have spend about $150 more. So, a great savings for two of the best products in the business!

reply

Re: Aimpoint Micro T-1 4MOA/M4 QD Mount Combo

Sat, 2011-09-24 00:45 — Anonymous

Your Rating:

I have the LT660 mount with T1 and I gotta say, this is the best setup I've ever used! With LaRue and Aimpoint combo you cant go wrong! The mount is rock solid, repeatable zero after you take the sight off and put it back on and its a very light weight setup as well. Very fast on target and the sight seems to disappear and all I see is the dot. The Aimpoint is a tough reliable optic dont let its small size trick you its as tough as its big brothers. LaRue is a great company to deal with they answer any questions you have and they ship your orders quickly, buy with confidants. I cant say a bad thing about these products they both scream quality! I have had Aimpoints with LaRue mounts for years now all have been top notch, I highly recommend both Larue and Aimpoint products. I will definitely be ordering more from LaRue! Thanks for the great products guys!!!!