Aimpoint Micro H-1 4MOA/M4 Mount Combo

These are a great solution for those who won't be using night vision, or diving past 15 ft with their gear...they cost less too!
Micro H-1 - Same frame, diode and finish as the T-1, these were developed as an economical choice for those who don't need, or desire the lowest settings needed for night vision equipment, or the extra waterproofing to dive down past 15ft (H-1's are still waterproof). They marry to our mounts just the same as well.

Like the Micro T-1''s, the H-1's are small enough to be used anywhere that you could put iron sights, these sights can be used on any type of firearm or archery equipment. A lightweight rifle with an Micro H-1 mounted on it remains a lightweight rifle! A hunting revolver with an Micro H-1 installed remains as easy to carry as with iron sights and is much quicker to aim. On a bow, the parallax-free Micro H-1 eliminates the need for a peep, allowing you to shoot accurately in lower light.

THIS SPECIAL PRICE COMBO DOES NOT INCLUDE THE FACTORY AIMPOINT MOUNT.

Combo comes with one of the following QD mount heights

Tall (LT660)
Allows a 1/3 co-witness with the Iron Sights on M4 Carbine and AR-15 Flattop.

Medium (LT660HK)
Provides Lower 1/3rd Co-witness with iron sights when using HK Height iron sights.

Short (LT661)
QD Mount for Aimpoint Micro Sight. Gets the Micro down low to use on Shotguns, PS90's and AK's

Absolute (LT751)
Allows absolute cowitness with the Iron Sights on M4 Carbine and AR-15 Flattop.

Each mount comes complete with replacement mounting screws with wrench, QD adjustment wrench, vial of blue Locktite and Instructions.

Note: Unlike iron sights, on MRD such as Aimpoint, you must focus on the target, NOT the dot!
Test outdoors with both eyes open ( the dot should appear fuzzy ).

Weight 84 g without mount and 105 g with mount ideal for rifles

ACET technology allows 50,000 hours of operation on one battery

Available in 4 MOA (minutes of angle)

Submersible to 15 feet (5 meters)

1X (non-magnifying) parallax free optic

Patent pending mount is keyed to the sight body to absorb recoil

Precision adjustment for windage and elevation

Top of protective caps fits into holes on adjustment screws

no other tool required

13 settings for use in daylight and lowlight conditions

Color: Matte Black

Unlimited field of view

Parallax-free and unlimited eye relief

Unaffected by extreme weather conditions

Rugged, durable construction

No hazardous materials

No laser emission that could be harmful to your eyes

Mechanical switch for speed and reliability

Increased aiming confidence

My objective lens is a little bit inclined!

This is not a broken sight! The front lens is a little bit inclined due to the fact the diode is not located in the center of the sight but it might be located either in the roof part or the lower part of the sight depending on the model. The lens and the diode are in line with one and other.

The dot in my Aimpoint sight doesn't look round. Is it defective?

If your dot does not appear to be perfectly round, the distortion is probably caused by the way that your eye perceives the dot, rather than by some mechanical defect. Due to differences in the lenses in different individuals' eyes, round objects that subtend areas near 3 minutes of angle may appear distorted in a variety of ways depending on the individual and other environmental influences. Inexpensive red dot sights sometimes have manufacturing defects that can cause the dot to be an odd shape.

A simple test that can be easily performed will allow you to determine the cause of the apparent distortion:

Turn the sight on and look through as you normally would. (This test is easiest when the sight is not mounted on a firearm, but can be performed with the sight mounted as well. Just make sure that the firearm is unloaded and pointed in a safe direction.)

While continuing to look through the sight, roll the sight on its optical axis.

If the dot's irregularities seem to revolve around the center of the dot like the spokes of a wheel, there is a mechanical defect causing the distortion.

If the dot does not roll with the sight, the distortion is caused in the way your eye perceives the dot. This is not to say that you don't have good vision. You can see clearly and still see a distortion in objects this small.

This effect is less pronounced in sights with larger dots. More people will see the dot in a sight with a 10 minute-of-angle dot as being perfectly round than will be able to see a 3 MOA dot as round.

Re: Aimpoint Micro H-1 4MOA/M4 Mount Combo

Wed, 2012-01-25 10:12 — Bonez556

Your Rating:

Item showed up just as described, VERY fast shipping. I would highly recommend this sight and larue tactical. I placed my order and in right around later I got an email with a tracking number. When i received my package it was very well packed and they actually included quite a few extras, a hat, bumper stickers, spices, a bottle opener and info pamphlets! Along with the aimpoint of course! I will definately be a repeat customer! A+++

reply

Re: Aimpoint Micro H-1 4MOA/M4 Mount Combo

Mon, 2011-11-14 13:30 — Anonymous

Your Rating:

I've gone through a lot of gear in the last 3 years. Few items have really stood up. This item is one of them. I ordered the LT660 with a lever mount about 3 years ago. I have yet to have any issues at all. Additionally, customer service really stood out from the rest of the pack.