Aimpoint Comp ML3 w/ LaRue Tactical Mount

(STANDARD MOUNT SHOWN)

Like the CompM3, the CompML3 features our breakthrough Advanced Circuit Efficiency Technology (ACET) that gives the sight unparalleled battery life and ease of use. Built primarily for use in daylight and in low light conditions for law enforcement and military applications, the CompML3 will hold up under the roughest physical handling and most severe weather conditions. It is the perfect choice for professionals, hunters and sport shooters who don't need night vision device compatibility but want an extremely tough and reliable sight. For night vision compatibility we recommend the CompM3.

The CompML3 comes with a replaceable outer black rubber cover, which protects it from scratching and adds an additional stealth factor. The outer cover is also available in Dark Earth Brown... perfect camo for use in the desert and in the jungle.

Unique features for CompML3:

Designed for day use, including dusk and dawn

New technology called ACET allows 50,000 hours of operation on one battery

Available in 2 dot sizes (2 and 4 MOA)Submersible to 135 feet (45 meters)Outer rubber cover now available in earth brown

Comes with replaceable outer black rubber cover

Reduced training time and ammunitionUnique features for CompML3

Designed for day use, including dusk and dawn

New technology called ACET allows 50,000 hours of operation on one battery

Available in 2 dot sizes (2 and 4 MOA)

Submersible to 135 feet (45 meters)

Outer rubber cover now available in earth brown

Comes with replaceable outer black rubber cover

Reduced training time and ammunition

Standard features for all Aimpoint® sights:

Unlimited field of view

Parallax-free with unlimited eye relief

Unaffected by extreme weather conditions

Rugged, durable construction

No hazardous materials used

No laser emission that could be harmful to your eyes

Mechanical switch for speed and reliability

Increased aiming confidence

Reduced training time and ammunition

TECHNICAL SPECIFICATIONS

OPTICAL DATA:

System Passive Red Dot Collimator

Reflex Sight

Magnification 1X

Eye relief Unlimited

Reticle, size 2 and 4 MOA *

Optical coating Anti reflex

ELECTRONIC DATA:

Battery Type One 3 Volt Lithium battery type 2L76 or DL1/3N

Battery Life, typical** 50,000 hours at setting 7 out of 10, CompM3 = 500,000 hours at NVD setting
Switch, dot brightness 10 settings Off, 9 Daylight of which 1 Extra Bright

MECHANICAL DATA:

Material housing Extruded, high strength aluminum

Surface finish Hard anodized, black, non-glare finishSight body and mount protected by a rubber cover, mat black

Material lens covers Thermoplastic elastomer, black, non-glare finish

Adjustment 1 click = 10 mm at 80 meters = 13 mm at 100 meters = ½" at 100 yds
Mounting 1 ring, 30 mm or Aimpoint QR

DIMENSIONS:

Length 130 mm(5.1)

Width/height 55 mm x 55 mm (2.2x 2.2)

Ring width 30 mm

Weight 220 grams (7.8 oz) incl. lens covers. Rubber cover 50 grams (1.7 oz)

ENVIRONMENTAL DATA:

Temperature Range -45 o C to +71o C (-50 o F to +160 o F)

Water resistance 45 m (135 ft)
*MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1" at 100 yards
** NEW Technology called ACET

My objective lens is a little bit inclined!

This is not a broken sight! The front lens is a little bit inclined due to the fact the diode is not located in the center of the sight but it might be located either in the roof part or the lower part of the sight depending on the model. The lens and the diode are in line with one and other.

The dot in my Aimpoint sight doesn't look round. Is it defective?

If your dot does not appear to be perfectly round, the distortion is probably caused by the way that your eye perceives the dot, rather than by some mechanical defect. Due to differences in the lenses in different individuals' eyes, round objects that subtend areas near 3 minutes of angle may appear distorted in a variety of ways depending on the individual and other environmental influences. Inexpensive red dot sights sometimes have manufacturing defects that can cause the dot to be an odd shape.

A simple test that can be easily performed will allow you to determine the cause of the apparent distortion:

Turn the sight on and look through as you normally would. (This test is easiest when the sight is not mounted on a firearm, but can be performed with the sight mounted as well. Just make sure that the firearm is unloaded and pointed in a safe direction.)

While continuing to look through the sight, roll the sight on its optical axis.

If the dot's irregularities seem to revolve around the center of the dot like the spokes of a wheel, there is a mechanical defect causing the distortion.

If the dot does not roll with the sight, the distortion is caused in the way your eye perceives the dot. This is not to say that you don't have good vision. You can see clearly and still see a distortion in objects this small.

This effect is less pronounced in sights with larger dots. More people will see the dot in a sight with a 10 minute-of-angle dot as being perfectly round than will be able to see a 3 MOA dot as round.

Re: Aimpoint Comp ML3 w/ LaRue Tactical Mount

Tue, 2012-02-07 11:51 — Anonymous

Your Rating:

I ordered my Aimpoint with the combined mount Friday. It was on the door step Monday. Fast shipping sight is a awesome. Especially with the mount I got the standard 150 mount. Attaching it to the red dot was easy and with the quick attach to the gun made it that much easier. Great job guys. And you cant forget all the extra goodies Larue likes to throw into your box with your order. Thanks again.

reply

Re: Aimpoint Comp ML3 w/ LaRue Tactical Mount

Sun, 2012-01-15 20:05 — apritch99

Your Rating:

I recently purchased this combo for my AR 15. I bought 2MOA dot with the cantilever mount with the quick release lever mount. EXCELLENT mount. VERY well built. The mount holds zero everytime I remove and reinstall the optic. No better mount on the market and worth the extra money. You get what you pay for. All my optics and mounts will be purchased here. Great combos and prices. And they give you fast service and a lifetime guarantee. Comes with a little Larue Care package as well. Will definitely be a returning customer. Thank you again. Adam- Bakersfield,CA

reply

Re: Aimpoint Comp ML3 w/ LaRue Tactical Mount

Wed, 2011-12-21 18:37 — Anonymous

Your Rating:

Great sight. I used one on my patrol rifle for several years and replaced it only because my Dept. bought me a M2 that was compatible with NV for use on our tactical team. It never failed me and the quick release Larue mount is well worth it. Larue is the only place I will buy optics. - K9dude124