Aimpoint Comp M2 #10336 with LaRue Tactical Mount

Need Help? Call 512-259-1585

Checkout Cart

Aimpoint Comp M2 #10336 with LaRue Tactical Mount

Your rating: None Average: 5 (1 vote)

| Reviews

$591.60

SKU: 500-001

First introduced in 2000, nearly 300,000 CompM2 sights are now in use by many Armed Forces including elite Special Forces around the world. The CompM2, also known as the M68/CCO (when used by US forces), is the standard sight for the U.S. Army and U.S. Air Force as well as the armed forces of many NATO countries. Due to its compatibility with all generations of night vision device (NVD), the CompM2 is ready for use around the clock. The CompM2 holds up under the roughest physical handling and can withstand the most severe weather conditions and temperatures. In fact, the CompM2 is completely submersible and will withstand pressures up to 2,5 atmospheres allowing it to be taken up to 25 meters underwater. When the CompM2 was released, it became the benchmark against which all other combat optics are measured. While primary utilized by armed forces, hunters and sport shooters who want a professional grade sight can also use the CompM2.

Unique features for CompM2:

Compatible with every generation of NVDCET technology allows up to 10,000 hours of daytime operation on one battery100,000 hours of use on NVD setting

Unequalled light transmission Submersible to 75 feet (25 meters)

Standard CQB sight for Special Forces worldwide

CompM2 M68/CCO is the standard sight for U.S. Army and U.S. Air Force

Standard features for all Aimpoint® sights:

Unlimited field of view

Parallax-free with unlimited eye relief

Unaffected by extreme weather conditions

Rugged, durable construction

No hazardous materials used

No laser emission that could be harmful to your eyes

Mechanical switch for speed and reliability

Increased aiming confidence

Reduced training time and ammunition

TECHNICAL SPECIFICATIONS

OPTICAL DATA:

System Passive Red Dot Collimator

Reflex Sight

Magnification 1X

Eye relief Unlimited

Reticle, size 4 MOA *

Optical coating Anti reflex

ELECTRONIC DATA:
Battery Type One 3 Volt Lithium battery type 2L76 or DL1/3N
Battery Life, typical** 50,000 hours at setting 7 out of 10, CompM3 = 500,000 hours at NVD setting
Switch, dot brightness 10 settings Off, 9 Daylight of which 1 Extra Bright

MECHANICAL DATA:
Material housing Extruded, high strength aluminum
Surface finish Hard anodized, black, non-glare finishSight body and mount protected by a rubber cover, mat black
Material lens covers Thermoplastic elastomer, black, non-glare finish
Adjustment 1 click = 10 mm at 80 meters = 13 mm at 100 meters = ½" at 100 yds
Mounting 1 ring, 30 mm or Aimpoint QR

DIMENSIONS:
Length 130 mm(5.1)
Width/height 55 mm x 55 mm (2.2x 2.2)
Ring width 30 mm
Weight 220 grams (7.8 oz) incl. lens covers. Rubber cover 50 grams (1.7 oz)

ENVIRONMENTAL DATA:
Temperature Range -45 o C to +71o C (-50 o F to +160 o F)
Water resistance 45 m (135 ft)
*MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1" at 100 yards
** NEW Technology called ACET

My objective lens is a little bit inclined!

This is not a broken sight! The front lens is a little bit inclined due to the fact the diode is not located in the center of the sight but it might be located either in the roof part or the lower part of the sight depending on the model. The lens and the diode are in line with one and other.

The dot in my Aimpoint sight doesn't look round. Is it defective?

If your dot does not appear to be perfectly round, the distortion is probably caused by the way that your eye perceives the dot, rather than by some mechanical defect. Due to differences in the lenses in different individuals' eyes, round objects that subtend areas near 3 minutes of angle may appear distorted in a variety of ways depending on the individual and other environmental influences. Inexpensive red dot sights sometimes have manufacturing defects that can cause the dot to be an odd shape.

A simple test that can be easily performed will allow you to determine the cause of the apparent distortion:

Turn the sight on and look through as you normally would. (This test is easiest when the sight is not mounted on a firearm, but can be performed with the sight mounted as well. Just make sure that the firearm is unloaded and pointed in a safe direction.)

While continuing to look through the sight, roll the sight on its optical axis.

If the dot's irregularities seem to revolve around the center of the dot like the spokes of a wheel, there is a mechanical defect causing the distortion.

If the dot does not roll with the sight, the distortion is caused in the way your eye perceives the dot. This is not to say that you don't have good vision. You can see clearly and still see a distortion in objects this small.

This effect is less pronounced in sights with larger dots. More people will see the dot in a sight with a 10 minute-of-angle dot as being perfectly round than will be able to see a 3 MOA dot as round.

Re: Aimpoint Comp M2 #10336 with LaRue Tactical Mount

Mon, 2012-04-09 04:47 — Anonymous

Your Rating:

I have now become an Aimpoint fan after years of only using Eotech. I bought this site and mount and could not be happier.