LaRue Tactical

Home ›› Optic Combos ›› Red Dot Combos ›› Aimpoint

Aimpoint 3X Magnifier # 11324 With LaRue Tactical QD Mount LT602T ( Tall ) Or LT602S ( Short )

0
Your rating: None
   | Reviews
 
$605.80
SKU: 500-007-602
  • Description
  • Features
  • FAQ
  • Reviews
  • Instructions

The 3XMag magnifying module is specially designed for compatibility with Aimpoint® sights and for maximum flexibility and increased performance in the field. The 3XMag is a revolutionary tool for military personnel, law enforcement, sport shooters and hunters.

  • Mountable on a rail system behind Aimpoint® sights
  • Extremely fast and ingenious mounting solution Can also be mounted with a regular 30 mm ring
  • Provides extended range to the operatorCombines the best of two worlds... CQB & Designate Marksman or Perimeter Security
  • Increases confidence, performance and flexibility
  • No influence on point of impact. No need for re-zeroing the sightDoubles as handheld magnifying monocular

    TECHNICAL SPECIFICATIONS:
    OPTICAL DATA
    System Magnifying Module Magnification 3X Eye relief at 5° FOV 40 90 mm at full FOV 60 65 mm Reticle, size - Optical coating -

    MECHANICAL DATA
    Material housing - Surface finish Anodized aluminum, dark grey, rubber covered black Material lens covers - Adjustment - Mounting The 3XMag is provided with a 30 mm diameter tube (for mounting) and with 4 screw holes in the bottom surface for other mounting alternatives.

    DIMENSIONS
    Length 110 mm (4.3") Width/height 44x41 mm (1.7" x 1.6") Ring width 30 mm Weight 200 g (7,1 ounces) inc rubber cover

    ENVIRONMENTAL DATA
    Temperature Range -45° C - 70° C in operation and storage Water resistance 20 meters (67 ft)

    LARUE TACTICAL PART NUMBER
    500-007-602
    • My dot is not centered in the Magnifier when I look through it.
    If you are looking through your magnifier and the red dot is not centered you will need to use the 2 adjustment screws on the outside diameter of the Magnifier body, at the 12 0’Clock and 9 0’Clock position if the 3X Magnifier is mounted properly, to adjust the position of the magnifying prism inside the body of the optic. This is done by either tightening or loosening each set screw as needed so that the dot is seen in the center of the magnifier.

    My Magnifier will not fit in the LaRue Tactical Mount
    You will need to remove the rubber sleeve that slips over the front/objective lens of the magnifier to expose the objective end of the magnifiers tube body, this will allow the mount to slip over the front of the magnifier so that you can mount it properly in your LaRue Tactical mount

    Post new Review

    Please leave a star rating for your review.
    • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
    • Web page addresses and e-mail addresses turn into links automatically.

    CAPTCHA
    This question is for testing whether you are a human visitor and to prevent automated spam submissions.
    For installation of our 3x mount, you will need to remove the rubber cover from the front of the 3x magnifier. Take a razor blade and cut all the way around the rubber cover right in front of the bulged center section, on the ocular end of the optic. It will slide off. Then you will able to install the ring.
    ABOUT

    LaRue is known world-wide for sniper targets, quick-detachable mounting solutions and hyper-accurate 7.62mm and 5.56mm rifle systems.

    COMMUNITY
    CUSTOMER SERVICE
    RECENT ARTICLES
    KEEP UP WITH LARUE
    Sign Up for Our Newsletter
    * indicates required
    Close
    Copyright © 2011 LaRue Tactical
    Reg. U.S. Pat. & Tm Off.